Unmounting and Mounting the Side Pods

The side pods must be removed from the tablet frame in order to use the tablet in the Workhorse Splashproof Control Console Case.

Unmounting the Side Pods

To unmount a side pod, loosen the two thumb screws that hold the top of the pod to the back side of tablet frame and rotate the pod away from the frame at the top. Once rotated, the bottom catch can be released from the slot in the frame. Note, the thumb screws are retained in the pod.

Mounting the Side Pods

The pods mount using the reverse of the steps to unmount them. To mount a side pod, engage the bottom catch into the corresponding slot in the frame and rotate the top of the pod toward the frame. Once the pod is in place, secure the thumb screws into the back of the tablet frame.