Configuration Commands

The following configuration commands are available for updating firmware and configuring M5 modules for MSS vehicle systems:

  • vr_refresh - Refresh the firmware for a module
  • vr_enum - Enumerate (list) the connected modules
  • vr_setid - Set the Node ID and Group ID for a module
  • vr_debug_putty.py - Debug and/or configure a module
  • vr_create_virtport_all.sh - Create virtual ports for modules not connected directly to the RS-485 bus

More information about using these commands can be found in the following section of this guide.


VideoRay Documentation Only

[ Help us improve this document ]

[ Print this page ]

MSS Pro 5 Operator's Manual, Version: 1.00.00
Copyright © 2019, VideoRay LLC - The Global Leader in Micro-ROV Technology